When turning the selector knob to select another sound, it sometimes fails to load. The symptoms are that the trigger LED flashes much longer than normal (like 2 seconds or so) and then there is no sound. Turning it again usually resolves the issue.
top of page
bottom of page
Just on a hunch, I changed the SD card for a Sandisk one. So far, no failures to load and no crashes. I'll keep you posted.
If you can predictably recreate the crash we can issue a bug report and get it fixed in the next update. Or are you saying it happens randomly even when sound s aren't being loaded?
Check that the Part Select Switch is set to All. Other settings such as Sides and Hammer will show the same flashing led but changes in sound may not necessarily be audible.