top of page

Kickain Forum

Public·1 member

Noisy Kickain

My Kickain is a little noisy for some reason. There is noticable high frequency noise no matter how I change the settings of the module. I have tried every combination of settings but I always hear it. I am able to filter it out with EQ or a LPF but that makes me kinda grumpy becuase it eats one of my filters. I have updated to the latest firmware but that does not help. I have also tried putting the Kickain in its own palette with a dedicated power supply and also does not make a difference. Love the Kickain but this is taking the shine off my love a bit. Help.

86 Views
Zach Brisebois
Zach Brisebois
2023년 12월 15일

I am also having this exact same issue. I initially thought it was a possible power supply noise however i recently got a secondary travel case with a different output module and the issue still occurs. I believe the hum I am getting is between 5k and 10k Hz and it seems to get worse when the kickain is triggered and fades slightly witht the decay. I have also tried with no input from my mixer module with just the kickain going directly into my ouyput module and the hum still occurs

blairblair

LED Brightness

I know this will void my warranty, but could you tell me which is the current-limiting resistor for the LED? It's way too bright, Willem Dafoe and Robert Pattinson just showed up at my house.

50 Views
blair
2023년 3월 12일

Cool, I live in Berlin and we don't have daylight. Thanks for the information, I appreciate it!

CV range for VCA control?

I read in the manual that the 1VOct can now be used for level control of the kick - what’s the expected voltage range for this? Would e.g. a Flint Fader (0-5V source) go all the way from silent to full gain?

58 Views

No audio out

I recently purchased the kickain module and it was working fine on day one. day two I go to use the same patch and no audio is coming from the module. Has anybody else had trouble with theirs?

64 Views
Jason Mayo
Jason Mayo
2022년 8월 20일

Ok that’s great. Glad it all worked out in the end.

bottom of page