Hi - since I bought the module (a few weeks ago) I've had problems on boot. Normal behaviour is for the manual trigger button to blink a few times on power on before being ready for midi input, but in my case the light of the button stays lit after blinking, and the module is not responsive. Some times it blinks longer (2x or 3x the normal time) and the button unlit, but the module remains unresponsive. Switching off and on again doesn't solve the problem.
Here is a video showing this problem: https://drive.google.com/file/d/1DC1E7vPv-E6HVVQpGaTcppU0O0fs8UOU/view?usp=drive_link
Updating to the latest firmware didn't solve the problem either.
Has anyone experienced the same behaviour? Could you please help with this problem?
Thanks!
M;
Hi Jason,
I have continued having the same problem described above. Strangely enough, I have found the culprit is the file `6_EP200.pfon` in the standard library.
When I boot the module with that sound selected (number 6), the module (consistently) fails to boot and becomes irresponsive. This happens 100% of the times. Booting with any other sound selected, boots without issues (at least for the other few I have tried). It seems to be a problem with that file, since swapping sounds in the library (ie, renaming the file to `5_EP200.pfon` and renaming previous 5 to `6_ToyPiano.pfon` results in booting ok when sound 6 is selected (ToyPiano), but failing to boot with sound 5 (EP) is selected.
I don't know if you have encountered this problem before. Any help in solving it would be appreciated since this has become an annoying issue using this great module.
Thanks for your help,
M;
First try deleting the Settings.dat file on the SD card, you may need an SD card reader or adapter to do this. If the problem persists or it comes back then replace the SD card and download our pianophonic library from the website.